|
 |
3 HP Light Duty Reverse Forward Chaff Cutter Machine |
|
Home›Chaff Cutter Machine›3 HP Light Duty Reverse Forward Chaff Cutter Machine
Technical Specifications
| Capacity of the machine |
500-750 kg per hour |
| Width of Machine |
550 mm |
| Height of Machine |
900 mm |
| Length of Machine |
1100 mm |
| Electric Motor |
3 HP 1440 RPM |
| Motor Pulley |
90 mm! 1 grooves - 1 No. |
| Rotor Pulley |
300 mm / l grooves - 1 No. |
| "V" Belt |
B - 61 - 1 Nos. |
| Cutting Blade |
High Carbon High Chromium - 3 Nos. |
| Blade Size |
2 200mm x 48mm x 8mm - 2 Nos.
220mm x 48 mm x 6.5mm - l Nos. |
| Bearing |
Unit 207 - 2 Nos. U.C.P. |
| Sturdy Angle Stand |
1.5 inch x 1.5 inch x 1.25 inch thick M.S Angle |
| Pusher Roller |
90 mm x 230 mm Cast Iron - 2 Nos. |
| Drive Gear |
Forged steel Gear and Pinion - l set. |
Instruction about Electric Motor- Use 10 Amperes meter for 3 HP Electric motor and 15 amperes meter for 5 HP Electric motor
- Use Suitable wire for Electrical installation
- Earthing arrangement for the Electric motor should be made.
- Do not start the motor if there is less voltage.
|
|
